silikonpartners.blogg.se - Cymatic utrack24 pdf info

Cymatic utrack24 pdf info driver#
Cymatic utrack24 pdf info full#
Cymatic utrack24 pdf info portable#
Cymatic utrack24 pdf info software#
Cymatic utrack24 pdf info Pc#

So if the SMPTE was sent as Audio to the computer and the software can synchronize to an SMPTE Audio Stripe, then the computer should be more accurate than if it was receiving a Jittery Midi stream being sent as a Midi protocol over the same USB connection as the Audio. So if you think about it, in that scenario, the Jitter of Audio would probably be lower than the Jitter of Midi, because Audio has a higher priority than Midi, than if it was just MTC as Midi being sent over the Same USB port, rather than SMPTE as an Audio signal being sent / received between the computer and the Motu MTP AV. I'm pretty sure this is what was described in the manual. it did have its own SMPTE read write JACK IO. take into account the MTP AV was a Midi device and not an Audio device. SMPTE is an Audio signal and from what I've read about how a Motu MTC AV was written about working in the manual, is that when the Motu connects to a computer, the SMPTE Audio was described as being sent over the Serial/Parallel or USB ports, as Audio to the computer and then the computer derived MTC from the SMPTE Audio signal. i'd overlooked it because of lack of midi, but it look lightweight and compact.

Cymatic utrack24 pdf info Pc#

it records wav tracks straight to SD - and integrates with PC for the post production bit. Maybe sacrificing the notion of midi and focus on getting each track separately, with something like zoom r16, if that works standalone. has midi out (mtc?) but no midi in: how is internal mix, mute/solo controlled? D25s out to patchbay, record everything through it to its own channel. the older tascams or the zoom r8/16/24 etc for synced stuff or overdub there are hardware "studios". nothing fancy, just hit record, play as many instruments as you want, get multitracks for editing/mixing afterwards. allen & heath also made something similar (could stil be available). i think there are some other options out there. Powered USB port not required for operationįor more information on the uTrack24 please refer to the PDFs above.A very simple solution for multi trackr ecording (and playback) could be something like the cymatic audio utrack24.

iOS® 5 or higher with USB adaptor (e.g.

Any Mac hardware compatible with OSX 10.8 or higher.

Cymatic utrack24 pdf info driver#

Internet connection for driver download.

Windows® XP(SP2), Windows Vista, Windows 7, Windows 8.

One free USB 2.0 compatible port on computer System Requirements For USB Audio Interface Mode

Frequency Response (20Hz - 20kHz Bandwidth): ± 0 - 0.25 dB.

SNR (20Hz - 20Khz bandwidth: > 95dB, A-weighted.

THD+N 0dBFS (1 kHz sine wave) 20 Hz - 20 kHz bandwidth: -85dB,.

Frequency Response (20Hz - 20Khz bandwidth): ± 0 - 0.25 dB.

THD+N 0dBFS (1kHz sine wave, 20 Hz - 20 kHz bandwidth): -85dB,.

Frequency response (20 Hz - 20 kHz): +0 - 0.25 dB.

Full-scale Input Balanced: 20dBu, 8 Vrms.

THD+N 1dBFS (20 Hz - 20 kHz bandwidth): -85dB,.

Frequency response 20 Hz-20 kHz: ± 0 - 0.25 dB.

Cascading of two uTrack24 units to create a perfectly synced 48-track system.

Large, detailed LCD screen, dedicated menu buttons, and rotary push control allow for fast and intuitive adjustment of various settings.

BNC Word Clock Input/Output allows integration into larger digital systems.

RJ-45 Network connection allowing of remote control from uRemote.

Synchronize two uTrack 24 recorders for a total track count of 48 tracks.

Adjust level, panning, mute, and solo for all 24-inputs while enjoying detailed 24-segment hardware input metering, all with no external mixer required

Internal DSP mixer allows internal monitoring of stereo mix of all 24 inputs through front-panel headphone output and control room output.

Large, easy to use illuminated front panel transport controls.

3-segment hardware input metering per input channel.

Records directly to off-the-shelf USB hard drives attached to convenient front-panel USB port.

Alternate format 24x24 I/O using optional digital expansion module.

Allows connection of 24 channels of balanced input/output through 25-pin D-Sub connectors.When used with a Mac or Windows computer, the uTrack24 can be implemented as a 24 input and output audio interface, as well as having dedicated Control Room and headphone outputs with individual level control. The playlist mode within this unit supports uninterrupted playback. The uTrack24's primary function is as a multi-track recorder, however it can also play back up to 24 tracks, making this ideal for sound checks and other live applications. With its BNCWorldClock input and output, the uTrack24 can integrate seamlessly into other digital recording environments. This ensures that large live events can be recorded with ease. With its reduced sized of only 1U, this unit allows up to 24 input and output signals via D-Sub multi-pin connectors.

Cymatic utrack24 pdf info portable#

The uTrack24's design is compact and portable whilst not compromising on features and overall power.

Cymatic utrack24 pdf info full#

Full Description View Full Description Compact, Powerful Multi-Track Recorder